HotWetchipsbulk goodspackages

At a glance

  • Welded design
  • Nominal widths from 200 to 1,500 mm
  • Hinges flat,  dimpled and perforated
  • Hinge thickness 5 mm
  • Hinges made throughout of a single piece
  • Gap between hinges max. 1.5 mm
  • Side wing height 39.8 mm
  • Deflection radius upwards min. 150 mm
  • Standard drive chains inner width 10 mm or 20 mm
  • Roller Ø 30 mm
  • Breaking load of each chain 50,000 N
  • Maximum operating temperature 300° C
Hinged Steel Belt Pitch 63 heavy-duty version
For this version of the belt we recommend a sprocket with z=8 and a hub diameter of 72 mm. For a sprocket with z=6 the hub diameter may not be greater than max. 44 mm. For a hub diameter greater than 44 mm the hub must face outwards. Otherwise the side upstands would collide with the hub diameter.
Standard profile carriers NW = Nominal width B = carrier length = NW - 20 mm R = Edge clearance = 10 mm
Hinged Steel Belt with side wings
Section through a flat steel carrier
Section through a flat steel carrier
Connecting link
Flat steel carriers

Surface:

Perforated
Perforated
Dimpled
Dimpled
Flat
Flat